Tuning the mechanical properties and degradation properties of polydioxanone isothermal annealing

Polydioxanone (PPDO) is synthesized by ring-opening polymerization of p-dioxanone, using stannous octoate as the catalyst. The polarized optical micrograph (POM) shows thes pherulite growth rate of PPDO decreases with an increase in the isothermal crystallization temperature. PPDO is compression-molded into bars, and PPDO bars are subjected to isothermal annealing at a range of temperatures (Ta = 50, 60, 70, 80, 90, and 100 °C), and correspond to three different annealing times (ta = 1h, 2h, 3h). The effect on PPDO is investigated by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and scanning electron microscopy (SEM). With an increase in Ta and ta, the grain size and the degree of crystallinity also increase. Meanwhile, the tensile strength is significantly improved. The PPDO bars (90 °C, 2 h) reach the maximum crystallinity (57.21%) and the maximum tensile strength (41.1 MPa). Interestingly, the heat treatment process does not result in serious thermal degradation. It is observed that the hydrolytic degradation of the annealed PPDO is delayed to some extent. Thus, annealed PPDO might have potential applications, particularly in the fields of orthopedic fixation and tissue engineering.     

Effects of Different Drying Methods on the Retention of Bioactive Compounds,On-Line Antioxidant Capacity and Color of the Novel Snack from Red-Fleshed Apples

The aim of this study was to determine the effect of different drying methods: convective (at 50, 60, 70 °C), vacuum-microwave (at 120, 240, 360, 480 W and 360 W with reduction to 120 W) and hybrid (convective pre-drying at 50, 60, 70 °C followed by vacuum-microwave drying at 120 W) on the quality parameters of novel red-fleshed apple fruit snacks (RFAs), such as phenolics, on-line antioxidant capacity, water activity and color. Drying kinetics, including a temperature profile of dried material, and modified Page model were determined. Freeze-drying was used as a control method. The highest content of bioactive compounds in the samples was retained following freeze-drying, then hybrid, vacuum-microwave and finally convection drying. The antioxidant capacity measured by on-line 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS), identified anthocyanins, flavan-3-ols and phenolic acid as the main compounds responsible for this activity. Unfavorable changes in color, formation of hydroxymethylfurfural (HMF) and degradation of polyphenolics were noted along with increasing drying temperature and magnetron power. The red-fleshed apple snacks are a promising high-quality dehydrated food product belonging to functional foods category.     

Polydiacetylene‐Tb3+ Nanosheets of Which Both the Color and the Fluorescence Can Be Reversibly Switched between Two Colors

Polydiacetylenes (PDAs), an organic layered compound, show a series of intriguing properties, such as thermochromism and fluorescence emission in the red‐phase. However, their irreversible color change, and weak and single‐color fluorescence emitted only from the red‐phase PDAs, have limited their applications. Herein, we report double‐reversible PDA‐Tb³⁺ nanosheets of which both the color and the fluorescence can be reversibly switched between two colors. PDA‐Tb³⁺ nanosheets have the nearly defect‐free intercalated structure in which a layer of Tb³⁺ ions was intercalated in between each two PDA bilayers to tether almost all of the carboxyl groups at the end of the side chains of the PDA. When the PDA is in the blue phase, the PDA‐Tb³⁺ nanosheets emit the green fluorescence of Tb³⁺ ions. When the PDA is in the red phase, the Tb³⁺ fluorescence disappears while the intrinsic red fluorescence of PDA is effectively enhanced through the fluorescence resonance energy transfer (FRET) process; the PDA‐Tb³⁺ nanosheets emit stronger red fluorescence compared with the PDA in red phase. Moreover, the tethering of almost all of the carboxyl groups at the end of the side chains of the PDA endows the nanosheets with the double reversibility in both the color and fluorescence transitions.     

The influence of grafted cellulose nanofibers and postextrusion annealing treatment on selected properties of poly(lactic acid) filaments for 3D printing

l ‐lactide monomers were grafted onto cellulose nanofibers (CNFs) via ring‐opening polymerization, forming poly(lactic acid) grafted cellulose nanofibers (PLA‐g‐CNFs). PLA‐g‐CNFs and pristine PLA were then blended in chloroform and dried to prepare a master batch. PLA‐g‐CNFs/PLA composite filaments targeted for 3D printing were produced by compounding the master batch in PLA matrix and melt extrusion. The as‐extruded composite filaments were subsequently thermal annealed in a conventional oven, and their morphological, thermal, and mechanical properties were evaluated. PLA was successfully grafted on the surface of CNFs as demonstrated by elemental analysis, and the concentration of grafted PLA was estimated to be 33 wt %. The grafted PLA were highly crystallized, contributing to the growth of crystalline regions of PLA matrix. The incorporation of PLA‐g‐CNFs improved storage modulus of the composite filaments in both low temperature glassy state and high temperature rubbery state. Postextrusion annealing treatment led to 28 and 63% increases for tensile modulus and strength of the filaments, respectively. Simulated Young's moduli from the Halpin‐Tsai and Krenchel models were found comparable with the experimental values. The formed composite filaments are suitable for use in 3D printing. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 847–855     

A branch and cut algorithm for the location-routing problem with simultaneous pickup and delivery

This paper addresses a location-routing problem with simultaneous pickup and delivery (LRPSPD) which is a general case of the location-routing problem. The LRPSPD is defined as finding locations of the depots and designing vehicle routes in such a way that pickup and delivery demands of each customer must be performed with same vehicle and the overall cost is minimized. We propose an effective branch-and-cut algorithm for solving the LRPSPD. The proposed algorithm implements several valid inequalities adapted from the literature for the problem and a local search based on simulated annealing algorithm to obtain upper bounds. Computational results, for a large number of instances derived from the literature, show that some instances with up to 88 customers and 8 potential depots can be solved in a reasonable computation time.     

Structural properties and electrical characteristics of high-k Dy2O3 gate dielectrics

This paper describes the structural properties and electrical characteristics of thin Dy₂O₃ dielectrics deposited on silicon substrates by means of reactive sputtering. The structural and morphological features of these films after postdeposition annealing were studied by X-ray diffraction and X-ray photoelectron spectroscopy. It is found that Dy₂O₃ dielectrics annealed at 700 °C exhibit a thinner capacitance equivalent thickness and better electrical properties, including the interface trap density and the hysteresis in the capacitance-voltage curves. Under constant current stress, the Weibull slope of the charge-to-breakdown of the 700 °C-annealed films is about 1.6. These results are attributed to the formation of well-crystallized Dy₂O₃ structure and the reduction of the interfacial SiO₂ layer.     

Fabrication and transformation of dense SnO2 via laser ablation condensation

Dense SnO₂ nanocondensates with fluorite-type-related structures have been synthesized via severe heating-cooling under energetic Nd-YAG laser pulse irradiation of the Sn target in oxygen ambient. Transmission electron microscopic observations indicated that the fluorite type transformed in a martensitic manner into a baddeleyite-type structure with accompanied dislocations, twinning, commensurate shearing and shape change. The Pa3¯-modified fluorite-type structure was hardly observed possibly due to its transformation into α-PbO₂ type and then rutile-type structures in the dynamic process.     

Cosmological constant from quarks and torsion

We present a simple and natural way to derive the observed small, positive cosmological constant from the gravitational interaction of condensing fermions. In the Riemann‐Cartan spacetime, torsion gives rise to the axial–axial vector four‐fermion interaction term in the Dirac Lagrangian for spinor fields. We show that this nonlinear term acts like a cosmological constant if these fields have a nonzero vacuum expectation value. For quark fields in QCD, such a torsion‐induced cosmological constant is positive and its energy scale is only about 8 times larger than the observed value. Adding leptons to this picture could lower this scale to the observed value.     

Design of phase plates for shaping partially coherent beams by simulated annealing

Taking the Gaussian Schell-model beam as a typical example of partially coherent beams, this paper applies the simulated annealing （SA） algorithm to the design of phase plates for shaping partially coherent beams. A flow diagram is presented to illustrate the procedure of phase optimization by the SA algorithm. Numerical examples demonstrate the advantages of the SA algorithm in shaping partially coherent beams. An uniform flat-topped beam profile with maximum reconstruction error RE 〈 1.74% is achieved. A further extension of the approach is discussed.     

Effect of thermal-annealing on the magnetoresistance of manganite-based junctions

Thermal-annealing has been widely used in modulating the oxygen content of manganites. In this work, we have studied the effect of annealing on the transport properties and magnetoresistance of junctions composed of a La0.9Ca0.1MnO3＋6 film and a Nb-doped SrTiO3 substrate. We have demonstrated that the magnetoresistance of junctions is strongly dependent on the annealing conditions： Prom the junction annealed-in-air to the junction annealedin-vacuum, the magnetoresistance near 0-V bias can vary from ～-60% to N～0. A possible mechanism accounting for this phenomenon is discussed.